14LT-45C
ELECTRICAL SPECIFICATIONS
?Power Input .................... 220V-240 Volts AC 50 Hz?Picture Intermediate frequency
L? ................................................ 33.9MHz
L, B/G, D/K .............................. 38.9MHz
?Power Consumption
Normal Operation (Method IEC60107) .............. 40 W?Sound Carrier Trap
Stand-by Operation .......................................... < 10 WL? ................................................ 40.4MHz
L, D/K ......................................... 32.4MHz
?Audio Power Output Rating (MPO) / ImpedanceB/G ............................................ 33.4MHz
Internal Speaker ................................ 2.5 W, 16 &
?Adjacent Sound Carrier Trap
L? ................................................ 32.4MHz
?Speakers
Speaker .................................... 7.2 mm RoundL, D/K, B/G ................................ 40.4MHz
?Adjacent Picture Carrier Trap
?Convergence (Maximum Misconvergence)L? ................................................ 41.9MHz
L, D/K ...................................... 30.9MHz
B/G ............................................ 31.9MHz
AREA14? -
17??Aerial Input Impedance
A0.3VHF/UHF ................. 75 ohm Unbalanced
BC0.8
DE0.8
FGHJ1.3
?Tuning Ranges ..... 48.25MHz thru 855.25 MHzKLMN1.0
F?G?H?J?1.0VHF: S1 - S41 CH (Hiperband)
STUV0.9
E2 - E12 / F2 - F10
UHF: E21 - E69
VHF: OIRT R1-R12
?White Level
Apply the rated voltage at the rated frequency to the TV set, while it is receiving full white pattern RF signal of 60
dB/?V from its RF input via the pattern generator.
Turn all picture controls to maximum value. Measure the colour temperatures at the center of the screen by
using the colour analyzer.
X=0.304 ? 0.015 Y=0.306 ? 0.015
Specifications are subject to change without prior notice.
MODEL DESTINATION (Operation Manual Languages)
14LT45C: Czech, English, Hungarian, Polish, Romanian, Russian, Slovakian
WARNING
The chassis in this receiver is partially hot. Use an isolation transformer between the line cord plug
and power receptacle, when servicing this chassis.
To prevent electric shock, do not remove cover. No user-serviceable parts inside. Refer servicing to
qualified service personnel.
3 |